Schimpke 5000492 Filter Drier Shell Kit

Schimpke 5000492 Replacement Part

Includes:

• (1) - Filter Drier Core (-)
• (10) - Gaskets (-)
• (1) - Installation Instructions (-)

Specifications

• Manufacturer: Alco Controls
• Model # ADKS-48
• Refrigerants: All Fluorcarbon-Refrigerants Except R 40 (Methylchloride)
• Suggested Tonnage: 13-20 (Depends on Refrigerant)
• # of Blocks Required: 1
• Safe Working Pressure: 35 Bar (500 psig)
• Operating Temperature Range: -40° C to 50° C (-40° F to 120° F)
• WARNING:
• Do not use ALCO-Filter-driers on any other fluid media without prior approval of ALCO Engineering Department. Use on fluids not listed could result in chemical deterioration of the filter-drier.
• Before removing flange cover from shell, make sure pressure in system is brought to and remains at atmospheric pressure. Failure to comply may result in chemical deterioration of the filter-drier.
• In a severly contaminated system avoid breathing acid vapours, and avoid contact with the skin from contaminated refrigerant. Failure to do so may cause personal injury.

Replaces Old Schimpke Part Numbers

• There are no older part numbers.

Other Part Numbers

5000492, Alco Controls, H-48, PCN: 006969, M1442, Filter drier core, STAS-48, STAS-96, STAS-144, STAS-192, 3M Dri-Shield 3400, Moisture Barrier Bag, LOT 40010214

Fits Models:

(Press ctrl + F to find model number below.)

Various. (Call 734-326-3900 with your model and serial number for more information.)