Kanto-Seiki KAN08187 Replacement Part
Includes:
- (1) - Fan Motor
- (1) - Fan Blade
- (1) - Capacitor
- (1) - Motor Mount
Specifications
- Number of Fan Blades: 6
- Rotation of Blade: Clockwise Hub End
- Manufacturer: Nidec Techno Motor Holding Corporation
- Motor Model Number: SF-200-85-4A
- Voltage: 200
- Watts: 85
- Poles: 4
- Hertz: 50/60
- Rotation Per Minute: 1430/1670
- Insulation Class: E
- Motor Rotation: Clockwise Lead End
- Single Side Flat Shaft
- Shaft Dimensions: 1/2" x 1 1/2"
- Lenght of Motor Leads:
- Capacitor Rating: 2MFD @ 450 VAC
Note: Always check the fan blade on your fan assembly. Bad or unbalanced fan blades can cause premature motor failure due to vibration. If you are not sure what fan blade fits your fan assembly, call us at 734-326-3900.
🚀 To prevent premature motor failure, it is highly recommended you change your capacitor along with your motor. Capacitors out of tolerance can cause motors to overheat and prematurely fail. If you are unsure of what capacitor is required for your unit, please call us at 734-326-3900.
Replaces Old Kanto-Seiki Part Numbers
- There are no older part numbers.
Other Part Numbers
SF-200-85-4A, IEC60034-1, IP20, ATJ29, KAN 08187, CMPS-J, SNC B-H1411
Fits Kanto-Seiki Oilmatic, Moldmatic Models:
(Press ctrl + F to find model number below.)
Various. (Call 734-326-3900 with your model and serial number for more information.)
- SKU:
- KAN08187
- Condition:
- New
- Weight:
- 10.00 LBS
