Goodman Amana PCBBF112S Integrated Furnace Control Board

Goodman Amana PCBBF112S Replacement Part

Includes:

• (1) - Control Board (Part Numbers: PCBBF112S)
• (1) - Installation Instructions (Part Numbers: 997-070070-1)

Specifications

• Electrical Ratings:
• Input Voltage: 24 VAC
• Hertz: 50/60
• Maximum Input Current: 0.45 Amperage
• Relay Load Rating:
• Valve Relay: 1.5 Amperage @ 24 VAC 50/60 Hz
• Ignitor Relay: 6.0 Amperage @ 120 VAC 50/60 Hz (resistive)
• Inducer Relay: 2.2 FLA - 3.5 LRA @ 120 VAC
• Circulator Relay: 14.5 FLA - 25.0 LRA @ 120 VAC
• Flame Current Requirements:
• Minimum current to insure flame detection: 1uA DC*
• Maximum current for non-detection: 0.1uA DC*
• Maximum allowable leakage resistance: 100M ohms
• *Measured with a DC micro-ammeter in the flame probe lead
• Operating Temperature Range:
• -40 to 175 (Degrees Farhenheit) (-40 to 80 Degrees Celcius)
• Humidity Range:
• 5% to 95% relative humidity (Non-condensing)
• Timing Specs: (@60 Hz**)
• Flame Establishing Time: 0.8 sec max
• Flame Failure Response Time: 2.0 sec max
• At 50 Hz, all timing specifications should be increased by 20%
• Timing
• Specifications:
• (All times are in seconds unless noted otherwise)
• Pre-Purge = 15
• Initial Ignitor Warm-Up = 7
• Minimum Ignitor Warm-Up = 5
• Maximum Ignitor Warm-Up = 9
• Ignition Activation Period = 2
• Trial For Ignition Period = 4
• Retries = 2 Times
• Valve Sequence Period = 12
• Interpurge = 30
• Post Purge = 15
• Lockout Time = 300
• Heat Delay to Fan On = 30
• Heat Delay to Fan Off = 90/120/150/180
• Cool Delay to Fan On = 5
• Cool Delay to Fan Off = 45
• Auto Reset = 60 Minutes
• Humidifier = Yes
• Electronic Air Cleaner = Yes

Replaces Old Goodman Amana Part Numbers

• PCBBF123S
• PCBBF123

Other Part Numbers

5013N369377, 1165-310, PCBBF112, 1165-83-301A, 1165-310-I, 5013, HIS

Fits Goodman, Amana, Daikin, Janitrol, Kenmore, McQuay, Xenon, GMC, and Gree Models:

(Press ctrl + F to find model number below.)