EasySeal 4050-08 Refrigerant Leak Sealant

EasySeal 4050-08 Replacement Part

Includes:

• (1) - Refrigerant Leak Sealant (4050-08)

Specifications

• Works with all refrigerants and oils.
• Concentrated formula means less material in system.
• Clear tube so you can see the sealant go in.
• No need to pump down R-410A units.
• Perfect for split systems, heat pumps, microchannel coils, packaged units, and mini splits.
• No injection hose or caulk gun needed.
• One time use.
• Installation Instructions:
• Make sure system is running. Connect EasySeal direct inject to suction service port of system.
• Connect high side (red) line of manifold gauge set to the high side service port. Purge air from hoses and connect center yellow hose to EasySeal Direct Inject.
• Briefly open high side valve on gauge set to allow a little liquid refrigerant to push EasySeal into system. Close high side manifold valve and disconnect.

Replaces Old EasySeal Part Numbers

• There are no older part numbers.

Other Part Numbers

Warning: Do not bend, cut or deform EasySeal Direct Inject tube. Be careful not to allow refrigerant to spray on bare skin, as it could cause frostbite., Warning: Flammable Liquid and vapor. Causes skin irritation. Cause serious eye irritation. May cause respiratory irritation. May cause drowsiness or dizziness. Suspected of damaging the unborn child. May cause damage to organs through prolonged or repeated exposure., Prevention: Keep away from heat/sparks/open flames/hot surfaces. No smoking. Kepp container tightly closed. Ground/bond container and reveiving equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Wash thoroughly after handling. Use only outdoors or in a well-ventilated area. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Do not breathe mist or vapor. Wear protective gloves/protective clothing/eye protevtion/face protection., Response: If on Skin (Or hair): Take off immediately all contamined clothing. Rinse skin with water/shower. If skin irritation occurs: Get medical advice/attention. Take off contaminated clothing and wash before reuse., In Case Of Fire: Use appropiate media to Extinguish., If In Eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Coninue rinsing. If eye irritation persists: Get medical advice/attention., If Inhaled: Remove person to fresh air and keep comfortable for breathing. Call a pison center/doctor if you feel unwell., If Exposed Or Concerned: Get medical advice/attention., Storage: Sore in a well-ventilated place. Keep container tightly closed. Keep cool. Store locked up., Disposal: Dispose of contents/container in accordance with local/regional/international regulations., Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.

Fits Models:

(Press ctrl + F to find model number below.)

Various. (Call 734-326-3900 with your model and serial number for more information.)